Car dashboard and wheel close up

Ghost Immobiliser 2 fitting specialists

The worlds only un-detectable immobiliser - Now Tassa Approved

At Boundary, we absolutely love installing the Ghost 2 Immobiliser, it is quite simply the best vehicle security product on the market.

The Ghost is the world’s first aftermarket CAN bus immobiliser. Protect your car from theft like nothing else on the market today.

The Ghost protects your car from key-cloning, hacking, and even key theft. The only way a thief could take a Ghost protected car is by physically towing it away, even then they will never be able to drive it! The Ghost has no key fobs or LED indications to give away its location. The Ghost uses the buttons in your vehicle such as those on the steering wheel, door panels or centre console, to allow you to make a unique, changeable, PIN code sequence that must first be entered before you can drive your car. Just like your credit card but you can make your car PIN even safer by making it up to 20 presses long!

In order to make extreme security also be hassle free, autowatch have created both Apple and Android applications that connect to your car and allows you to get in and drive without having to enter the PIN code. This iPhone pairing allows a single, authorised, connection with a secret pairing code that is unique to every Ghost and communication between the Ghost and the iPhone is encrypted. All you have to do is pair your iPhone with your Ghost, leave the Autowatch Ghost application running in the background with Bluetooth enabled and you can drive conveniently and securely.

Engine Start Blocking

Engine Start Blocking

The undetectable Ghost Immobiliser will prevent the starting of the engine unless the unique, user defined PIN code has been entered first using a unique combination of the vehicles buttons.

Undetectable Using Diagnostics

Undetectable Using Diagnostics

A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The Ghost has no circuit cuts so it cannot be found using these methods.

No Radio Frequency Signals

No Radio Frequency Signals

Thieves cannot use sophisticated RF scanning, code-grabbing technology to detect what security device your vehicle has when it does not transmit any signals like conventional security systems.

Advantages of using the CAN data network

Advantages of using the CAN data network

The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle.

Silent Operation

Silent Operation

Because the unit communicates with the ECU on the data bus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of a traditional immobiliser relay.

Stops key cloning and ECU swapping

Stops key cloning and ECU swapping

A thief cannot simply add a new key or replace an ECU to bypass the Ghost and start the vehicle. Only a correct PIN code will allow the engine to start.

Tested for each vehicle

Tested for each vehicle

Due to the nature of the data bus communication, the ghost has been adapted and tested for every vehicle listed as compatible. When a vehicle is listed it has had its operation with ghost thoroughly tested.

Weatherproof tiny device

Weatherproof tiny device

The Ghost is sealed and so small it can be installed and wrapped into the vehicle wiring harness anywhere in the vehicle making it near impossible for a thief to find.

Emergency PIN code override

Emergency PIN code override

A thief cannot simply add a new key or replace an ECU to bypass the Ghost and start the vehicle. Only a correct PIN code will allow the engine to start.

Ghost Immobiliser Installers for the North West.

From our extensive workshop in St Helens Boundary Car Care are ideally situated just off the motorway network for those customers wishing to have the ghost immobiliser installed.

Installation of the ghost immobiliser takes upto 2 hours but often installation is completed much sooner. We have a customer waiting area with TV, free tea and coffee and free WI-FI for customer use allowing you to continue catching up on work whilst having the Ghost Immobiliser Installed.

For trade customers who have booked in advance we can collect and return vehicles to have this device installed.

Installing the Ghost Immobiliser involves no wire cuts, it connects to the can bus network and operates through the ECU. We have installed the Ghost Immobiliser in a wide range of vehicles including Ferrari’s, Porche, Range Rover, Nissan GTR, Ford Focus Sti and the Fiesta Sti amongst others.

Installation of the Ghost Immobiliser is not available on every vehicle model so please fill in the contact form to see if it can be installed on your vehicle.


If you have any questions or would like a quote to have a Ghost 2 fitted to your vehicle please call us on 01744 813282 or email

We are now installing the Ghost 2 that works with Stop / Start technology.

Next generation vehicle protection

The Ghost is a unique next generation device that secures your vehicle without the need for cutting wires or adding after market alarm/immobiliser key fobs. The device is connected to the vehicles CAN Data Network and a personalised PIN Code is programmed into the Ghost using the vehicles existing buttons on the dash board and steering wheel to create a unique code pattern that must be selected before the vehicle will start…

Did you know the Autowatch Ghost is compatible with a very wide range of vehicle manufactures? Audi, BMW, Ford Land Rover, Range Rover, Porsche, Ford, Hyundai, Honda, Nissan, Mercedes and VW. There are many more vehicles being added daily.

Most common vehicles currently getting secured with the Ghost are… Focus RS, Audi RS, VW R, Range Rover Sport / Evoque.

Did you know the Autowatch Ghost can’t be cloned by any method? Due to the device only communicating via the vehicles buttons and Bluetooth only when the device has been made discoverable meaning it can’t be seen by scan tools or found by a vehicle thieves. The Ghost really is a set forward in vehicle security.

The are many ways to disarm the system in a secure mannor.

  • Entering a combination of buttons such as indercator stalk, window buttons, heater buttons.
  • Entering the PIN override code via the accelrator pedal.
  • Using the Mobile Smartphone app to act as an ADR override.



Engine Start Blocking. The Ghost will prevent the engine starting unless the unique, user defined, code sequence has been entered first.

Undetectable using any diagnostics tools. A professional thief can use readily available diagnostic tools to detect alarm/immobiliser circuits on modern vehicles and disable them. The Ghost has no circuit cuts so it cannot be tampered with in this way.

No Radio frequency signals. Thieves cannot use sophisticated RF scanning or code grabbing technology to intercept and detect what security system is fitted as it does not transmit any signals.

CAN Data Network. The advantages of using the vehicles own CAN Data Network has several advantages, including low impact installation, very low probability of being detected and disabled, and can be fitted into the vehicle in any number of locations.

Silent Operation. Because the unit communicates with the vehicles ECU on the CAN Data circuit, it is totally silent so it does not give away its location.

Stops Key Cloning and ECU Swapping. A thief cannot now simply add a new key or replace the ECU to steal your vehicle as only the correct data inputted will allow your vehicle to start.

Tested for Each vehicle. Due to the nature of CAN Data Ghost has been adapted and tested for every vehicle that we list as compatible.

Weatherproof tiny device. The Ghost is sealed and so small it can be installed and wrapped into the vehicle harness virtually anywhere making it virtually impossible for a thief to find.

Please be aware this device is NOT Thatcham approved.

Emergency Pin Code override. If the PIN Code is forgotten the car is sold, or a programming button used becomes inoperative there is a secure unique reset code for each device.
Service/Valet Mode. Allows your vehicle to temporarily start and drive without requiring your unique code.

Simple PIN Code change process. At any time you can choose a unique different PIN Code configuration.

Use the vehicles original buttons to enter the PIN Code. The buttons in modern vehicles send data all a round the vehicle which allows the Ghost to respond to your specific inputs via the CAN Data without the need to add extra wiring.

Like all immobiliser systems the Ghost will not be able to secure your car if it has been found and removed by a thief. Whilst the Ghost has an edge over every other immobiliser on the market by being tiny and is able to be placed in many different places in the car it could still be found if a thief has enough uninterrupted time. This is where the Shadow comes in. This upgrade add-on unit for the Ghost gives an additional layer of security without compromising the Ghost location.

The Shadow connects to the same CAN network as the Ghost so it does not communicate over radio frequency, something which a thief could use to locate other immobiliser systems with “wireless relays”. The Shadow has an internal immobiliser relay that can be used as an emergency use immobilisation, normally sitting dormant and hidden and only activating should the Ghost be removed. The Shadow also has an output that can be used to trigger a siren when someone is trying to start the vehicle without being authorised or if the Ghost is removed. This output could also be connected to a tracking/paging system to give a silent warning of theft attempts.


  • Additional layer of security to the Ghost Immobiliser
  • Internal relay for emergency immobilisation
  • CAN connected, no RF to give away location
  • Output for siren / tracking when theft is being attempted
  • Does not compromise the Ghost location