ECU REMAPPING | ECU TUNING | ECU PROGRAMMING

power and economy tuning

WHAT IS ECU (ENGINE CONTROL UNIT)?

All modern cars and vans on the road today have an ECU (ENGINE CONTROL UNIT). This Engine Control Unit can almost be described as the vehicles ‘brain’ and contains a small processor that takes information from various sensors throughout the engine. It analyses information such as the engine temperature, accelerator pedal angle, oxygen content in the burnt exhaust gases as well as many more parameters. Using the information from these sensors it can then add the right quantity of fuel, at just the right time to provide a good mix of fuel economy, performance and emission control when pulling away, overtaking, pottering down the road or zooming down the motorway.

WHAT IS ECU REMAPPING/PROGRAMMING?

When a manufacturer develops a new car they have to take into consideration all of the conditions it may be subjected to in all of the regions in which they intend to sell this model. This means instead of just optimising the ECU’s program or ‘map’ to deliver the best performance or the most fuel efficiency they have to make compromises to the map to take into account these potential differing operating conditions. These could include sub-standard fuels, extremes in temperature and altitude, differing emission laws and even the possibility that vehicle may not be serviced on a regular basis and in accordance with the manufacturers recommended instructions.

ECU remapping is taking a read from the ECU’s processing chip of the vehicles standard compromised map and adjusting various parameters within the map such as fuel pressure, boost pressure (on turbocharged applications) ignition advance and throttle pedal control amongst others to release the true performance from the engine. It is a completely safe process as it is just giving the engine the performance it should have had in the first place before all the compromises were applied to the original programming. Every engine will have its own unique map and by adjusting this we can fine-tune the characteristics of the engine; unleashing more power and in many cases reduce fuel consumption too.

Enhanced Driveability
Benefits of Remapping

BENEFITS OF ECU REMAPPING/PROGRAMMING

ECU programming will not only improve the engines power and torque figures it will also sharpen the throttle response and widen the power-band. This will make the power delivery a lot more linear, which in turn will make the vehicle feel a lot livelier to drive and the engine more flexible. Frequently, the vehicles power output is restricted by the manufacturer for no other reason than to ensure that the vehicle fits into a class to suit fleet buyers. As a driving enthusiast, you do not need or want such restrictions placed upon your vehicles ECU and its performance therefore you can benefit from the hidden power and torque locked away within your engine management system.

The other main benefit of remapping will be a reduction in fuel consumption. With the extra torque especially at the bottom of the rev range you will see a fuel saving as it will require less throttle input to maintain motorway speeds, you can drive in a higher gear at a slower speed as well as helping significantly when fully laden, towing or on gradients and even in start stop traffic.

SAVING FUEL WITH ECU REMAP/PROGRAMMING?

When we remap a vehicle, especially when fuel saving is the priority we focus on improving the low-end torque in particular and widening the power-band as far as we can.

This increase in low-end torque will mean less throttle pedal input is required to maintain cruising speeds, when fully laden or when on a gradient. It will also mean that the vehicle will be more comfortable in higher gears at slower speeds as well requiring fewer gear changes overall.

If you combine these factors with adjusting your driving style to make the most of the extra low-end torque you will see an improvement in fuel consumption. This is most effective on turbo-diesel engines where the savings could be as much as 20%!

fuel savings with a remap
the modifications a Remap makes

WHAT DO YOU ACTUALLY MODIFY IN MY VEHICLE?

We do not change any hardware in your vehicle, we just modify the operating parameters in the ECU’s program or ‘map’. In many cases the map stored on the ECU’s processor can be accessed via the on-board diagnostics port (OBD) in the vehicle, normally found under the dashboard. In some newer models the ECU will have to be removed from the vehicle and the casing opened, our technicians will then use specialist tools to read the original map straight from the processing chip.

The technician will then upload the original map to our map writing team who will adjust the parameters to maximise the performance, fuel economy or a clever blend of both. Depending on the vehicle and ECU type the chip tuning process can take under an hour and if at any time you wish to return your vehicles ECU to its original default settings, this can be done easily and free of charge as we always keep a copy of the original software as a backup.

Contact Boundary Car Care LTD

105 – 113 junction lane, Sutton, St Helens, WA9 3JL

Telephone: 01744 813282

Email: Info@boundarycarcare.co.uk

Opening Times

Monday: 8.30am – 5.00pm

Tuesday: 8.30am – 5.00pm

Wednesday: 8.30am – 5.00pm

Thursday: 8.30am – 5.00pm

Friday: 8.30am – 5.00pm

Saturday: 8.30am – 1.00pm

Sunday: Closed

Request a Quote from us

Re-Mapping Quote

If you are interested in having your vehicle remapped, fill in the following form and one of our team will be back in touch soon.

First
Last
Please enter a contact number
Please enter the make and model of the vehicle you are enquiring about